sliding patio door Repair service near me Patio Doors Repairs

Your sliding glass patio door repairs doors to let in more light and increase your home's energy efficiency. In time, they might start to show signs that require some maintenance.

The majority of problems with sliding patio doors are relatively easy to repair. Find out how you can keep your sliding patio doors looking and functioning like new.

Tracks that are damaged or dirty Tracks

The tracks of your sliding patio door might be dirty or clogged. Over time, the dust and grime of daily use build up on the track and can cause the door to become jammed or even break down completely.

A regular cleaning of sliding doors and tracks in your chores at home can help to reduce the amount of accumulation. Start by sweeping or vacuuming any large debris off the tracks and then wiping them down with warm water and a non-abrasive cleaning product, such as dish soap. Vinegar can be added to your cleaning solution to help get rid of stubborn grease and dirt staining.

If you notice that your sliding door isn't able to move smoothly after completing these steps, it may be an indication of more serious damage that requires a professional repair or replacement. There are a few basic solutions you can try before calling a professional to avoid expensive repairs or replacements.

It is important to put a doormat on the bottom of your sliding doors to trap dirt before it has a chance to reach the tracks. It is also important to cut any bushes or plants near your sliding patio door repair service doors to reduce the amount of debris tracked into the tracks. Close the door in a timely manner to avoid damaging the rollers and wheels. By keeping your doors clean and lubricated, you can extend their lifespan considerably.

Rollers that are not aligned

Sometimes it happens that a sliding patio door may become misaligned or gets stuck. This is usually due to dirt or other obstructions which can be easily removed. However, it could also be due to bent tracks or rollers. In the latter case it is possible to straighten the roller by extracting them using their adjustment screws and cleaning them using rubbing alcohol. These parts are prone to damage.

If your doors remain stuck and stick, you can try using lubricants on the rollers to reduce friction and allow them to slide. It is recommended to use a silicone-based lubricant, because petroleum-based lubricants can attract dirt faster. It is crucial to clean the tracks and rollers before applying lubrication.

After cleaning the rollers you can reinstall using their adjustment screws. Use the same lubricant that you used to clean them. Make sure you push the rollers fully in their channels when reinstalling them. You can then test your door to determine whether it is now sliding effortlessly.

If the issue persists it may be necessary to take down your door and inspect the rollers and tracks for any more serious issues. If the tracks or wheels are bent badly it could be necessary to replace them. In such a case it's best to contact an expert for the installation.

Warped Glass

Sliding glass doors are ideal to bring in natural light and the outdoors into a room, but they can also be susceptible to damages that require repair or replacement. Cracks, warping and fading are just a few of the most frequently encountered issues. Warping occurs when the components which make up your sliding glass patio door start to degrade due to exposure to sun, heat and other environmental elements. Cracking often results from impact damage, such as from a ball or lawn mower run-in, while fading usually occurs due to repeated contact with sunlight or other natural elements.

If you have sliding glass patio doors that are difficult to close and open it could be an indication that the rollers and tracks do not work properly. This issue could be caused by the accumulation of dirt, rust, or debris in the wheels or track or due to a lack of or lubrication. This problem can be resolved by regularly cleaning the tracks and rollers and clearing obstructions.

The locking mechanism might also be defective which makes it difficult to open and close your sliding patio doors. This could be due to misalignment or wear and tear, however, a simple fix is to adjust the locking mechanisms by using the adjustment screws located in the bottom of the track.

Air leaks or drafts around your sliding patio door are a common issue that can affect the efficiency of your home's energy usage. They usually result from worn weather stripping and poor door alignment, which can be easily corrected by replacing the old weather stripping and realigning the doors.

Loose Handle

It can be a hassle when the handle of the sliding door is loose. It becomes difficult to open the door. This is typically caused by an improperly aligned locking mechanism, which can be fixed by loosening the screws that secure it and then tightening them until they are snug against the jamb of the door.

A loose handle could be caused by the handle separating from the spindle that connects it to the inside or handles outside. This can be caused by a variety of reasons, including excessive use, wear-and-tear or just aging. If the issue isn't dealt with quickly, the handle can be loosened and fall off.

The best way to fix this issue is to start by locating the screws that attach the interior and exterior handles. They are typically hidden behind plastic tabs that can be removed with a flathead (or a Phillips head screwdriver, in some instances) screwdriver. Keep these screws in a safe place to avoid losing them.

After the handles have been removed, the next step is to remove the loose spindle. You can do this by tapping the end of the spindle with a hammer until it is freed from its position within the door. Then, the new handle can be put in place by simply putting the spindle through the hole on the interior handle and then placing the other end of the spindle through the hole on the exterior handle. Once the handle is in place, it can be tightened by screwing the screws back into place and then examining to confirm that the lock and unlock mechanisms work correctly.

Poor weatherstripping

A cracked or worn weatherstripping could let water and air get through your patio doors, which can compromise the comfort and energy efficiency of your home. In addition to letting in water, it can also create drafts and increase your heating or cooling costs. The good news is that replacing the weatherstripping is a simple repair that doesn't require professional help. You can take off the old weatherstripping by loosing the staples with a screwdriver, or gently prying it off with the help of a putty blade, and then taking it off the door. You can then clean the area, and then apply a layer of weatherstripping that is secured by an adhesive. This will prevent leaks and improve the comfort.

If your sliding patio doors are no working as they should, it's essential to fix the issue as soon as possible to prevent any further damage and ensure they remain functional for a long time to come. Depending on the severity of the issue, DIY or professional repair/replacement may be the best solution.

Most problems with sliding patio doors are caused by dirty rollers, misaligned tracks, or an untidy handle. In the majority of instances these issues can be addressed by regular maintenance and cleaning, which includes oiling the track and rollers, as well as adjusting them and tightening the hardware. If these steps aren't working, it's best to seek professional advice to ensure that your patio screen door repair near me door is operating as it should. Review the warranty information before you decide to replace or repair your patio door. This will save you money in the long run on repairs and replacements.