How to Unstick a suzuki celerio remote key Ignis Key

Suzuki's fanciful, inexpensive city car gets a midlife refresh. It's not a hot hatch, but it can handle the tarmac in rural and urban areas well. And its tight turning circle makes driving in the city a breeze.

The new model is also loaded with intelligent safety and driver assistance features which includes lane departure warning and a sleepiness alarm, which are both welcome enhancements for long drives.

Steering Lock

The steering lock is a security feature that protects your Ignis from being stolen while in gear. It's a useful safety feature, but it can be annoying when you're in a rush and you're unable to unlock your steering wheel. There are a few basic things you can do to fix the issue.

The first step is to make sure that the ignition switch is in the "on" position. If that's the case, then try turning the key in the same direction you did prior to the time that the wheel was locked. It's a bit difficult, but in most cases it's enough to unlock the wheels.

If the wheel does not unlock, you can spray a little of canned air into the ignition cylinder, to lubricate it. Make sure you wear eye protection before taking this action to ensure you don't get any canned air in your eyes! Liquid graphite may also work to help lubricate the cylinder.

If none of these strategies work, you'll need replace the ignition lock assembly. Fortunately, this is an easy part to locate at any auto parts retailer. Make sure to purchase the exact replacement key for suzuki swift and compare it to the original. Uncover the ignition and inspect the ignition assembly.

Worn

The steering lock can cause the ignition switch to get stuck. This is a security feature that prevents your Ignis from rolling away while the engine is running. If this happens, turning the steering wheel will release it.

As time passes, your Ignis key where can i get a suzuki key made start to wear out and become more difficult to turn. It may not happen as often as a bad switch, but it can happen. If this is the situation, you should replace your ignition key.

It is also important to see if there is something that is blocking your Ignis key from getting into the ignition cylinder. Sometimes there can be dirt or debris that could get stuck inside and stop the key from turning in the way it should.

You could also try an ounce of lubricant to determine if it helps. There are a myriad of types of lubricant that you can purchase, so take a look around your garage or go to an auto parts shop in your area to find one that can work.

A silicon "glow-in-the-dark" key cover is an alternative. These covers absorb light and release it when conditions are dark or murky. They also to protect your fob or key from wear and tear. They are available for a wide range of Suzuki models and are available on the internet or at the suzuki vitara key replacement dealership near you.

Bent

Over time and with frequent use, a key could get bent. This could cause the teeth of the key to not engage with the lock cylinder in the same manner and prevent the key from turning in the ignition. In this instance, you will need to replace the key. If you have a spare car keys suzuki key, it is a good idea to have it duplicated and put it in a safe spot.

Another possibility is that the cylinder for ignition itself could wear out. The lock pins within the cylinder could become caught together, which prevents the key from going completely into or out of the ignition cylinder. This can be resolved by replacing the cylinder, but it is best to replace the cylinder prior to the key is stuck in the ignition.

If your Ignis key stuck even after trying the simple fixes It could be the right time to try lubricating the cylinder. Graphite or liquid graphite could allow the lock pins move more freely and unbind your key. You can find this in most auto parts stores. Make sure to place your Ignis into park prior to applying the grease. Do not try to use your hands to release it from its binding. This could cause more serious problems.

Broken

If you've tried everything to get a key off, but it doesn't work the lock, your last resort is to try a lubricant. You can buy this lubricant at your local auto parts store and apply it using an abacus or a cotton swab to the inside the lock cylinder. Move the key back and forth gently to spread the lubricant around and then try again. Try to massage it forward but be careful not to push too hard because you could damage the cylinder.

It's also possible that the internal circuitry of the key will become unresponsive as time passes. It's not as common as it sounds, so you'll need to make a duplicate of the key.

Lastly, the case of your Suzuki key fob may be damaged or worn out. This is more common if you use a cheap keyfob that is a replica with an outer shell made of plastic or rubber. Depending on the situation The Key Crew can sometimes migrate the internal circuitry of the old key fob to the shell of a new case, avoiding the need to pay for an entirely new key fob. When we contact you to schedule your service, we'll inform you know if this is a feasible alternative.