Sliding Patio Doors Repairs

Your sliding patio doors can bring sunlight into your home and increase its energy efficiency. However, as time passes, they may begin to show signs of wear and tear that will require some maintenance.

Luckily, the majority of problems with sliding patio doors are simple to address. Learn more about how you can keep your upvc patio door repairs near me doors looking and functioning like new:.

Tracks that are damaged or dirty Tracks

The tracks of your sliding patio door might be dirty or clogged. Over time, the grit and grime of daily use accumulates on the track and can cause the door to jam or even break down completely.

The buildup can be slowed by including regular light cleanings of sliding doors and tracks during your regular chores. Begin by cleaning any large debris from the tracks, and then wiping them down with warm water and a non-abrasive cleaning product like dish soap. Vinegar can be added to your cleaning solution to help remove stubborn dirt and grease stains.

If your sliding door still not moving smoothly even after you've followed these steps, it could be a sign that there is more damage. This may require a professional to fix or replace the door. But, there are simple fixes that you could try before calling the professionals to prevent costly repairs or replacements.

Place a mat under your sliding doors. This will help catch dirt before it gets to the tracks. Regularly trim any plants or bushes that are near your sliding door to reduce the amount of debris tracked into the tracks. Make sure to close the door in a way that it doesn't slam into the tracks and damage the wheels and rollers. You can prolong the life of your doors by maintaining them clean and lubricated.

Misaligned Rollers

Sometimes it happens that a sliding patio door can become out of alignment or becomes stuck. Usually, this is due to obstructions or dirt that can be easily removed. But sometimes it can also be the result of bent tracks or rollers. In the latter scenario, you may be able to re-align the roller by taking them out by using their adjustment screws and then cleaning them with rubbing alcohol. Be careful, as these parts can be delicate.

If your doors are still stuck, you can try lubricating the rollers to reduce friction and allow them to slide. It is best to use a silicone-based lubricant, since petroleum-based ones tend to draw dirt more quickly. It is also essential to clean the tracks and rollers prior to lubricating them.

After cleaning the rollers, you can put them back on using their adjustment screws. It is recommended to use the same lubricant you used to clean them. When you are reinstalling the rollers be sure to push them all the way into their channels. You can test the door and see if it glides smoothly.

If the problem persists it may be necessary to remove the door and examine the rollers and tracks. If the wheels or tracks are bent badly, you may need to replace them. In such a case, it's a good idea to call in an expert for the installation.

Warped Glass

Sliding glass doors are great for bringing in natural sunlight and the outdoors into a space, but they are also susceptible to damages that require repair or replacement. Cracks, warping, and fading are some of the most frequently encountered issues. Warping happens when the materials that comprise your sliding glass patio doors repairs door start to degrade as a result of exposure to sun, heat and other environmental elements. The most common cause of cracking is impacts, such as a lawnmower or ball smacking into the door. Fading usually occurs due to repeated exposure to sunlight as well as other elements.

If your sliding patio doors aren't easy to close or open, it could be an indication that the tracks and rollers aren't functioning properly. This problem may be caused by the accumulation of dirt or rust in the wheels or track or due to a lack of or lubrication. This issue can be solved by cleaning the rollers, tracks and removing obstructions.

Another reason why your sliding patio doors may be difficult to open or close is that the locking mechanism is no longer working. It could be due to misalignment, wear and tear, or a combination of both. To fix this issue, simply adjust the locking mechanism by turning the adjustment screws located at the bottom.

Drafts or air leaks that occur around your sliding patio doors are a frequent issue that can greatly reduce their energy efficiency. They usually result from damaged weather stripping or poor alignment of the doors that can be easily fixed by replacing the weather stripping and re-aligning the doors.

Loose Handle

It can be quite frustrating when the handle of sliding doors becomes loose. It becomes difficult to open the door. This is due to an incorrectly aligned lock mechanism. It can be repaired by tightening and loosening the screws holding it in place.

Another reason that is commonly cited for a loose handle is that it has separated from the spindle that connects the interior and exterior handles. This is usually the result of a variety of factors, such as excessive use wear and tear or just general ageing. If the problem is not addressed quickly, it could eventually result in the entire handle becoming loose, and possibly falling off completely.

To resolve this issue to fix it, you must first identify the screws that join the interior and exterior handles. The screws are typically hidden behind plastic tabs that can be removed with a flathead (or a Phillips head screwdriver in certain cases) screwdriver. It is a good idea to store these screws somewhere safe so that you don't lose them.

Once the old handles have been removed, the next step is to remove the spindle that is loose. This can be accomplished by tapping the end with a mallet or hammer until it falls free from its place inside the door. The new handle is then fitted by placing the spindle into the interior handle hole and the other end through the hole on the outside of the handle. Once the handle has been installed then tighten it by screwing back the screws, and then check to ensure that the lock and unlock mechanism functions correctly.

Poor weatherstripping

A worn or cracked weatherstripping may let water and air be able to seep through your patio door repair company near me doors, which can compromise the comfort and energy efficiency of your home. It can let in moisture and create drafts that will increase your cooling and heating costs. It is easy to replace damaged weatherstripping without professional assistance. You can remove the old weatherstripping by loosing the staples using an screwdriver, or gently squeezing it with a putty knife and pulling it away from the door. After that, you can clean the area and apply a new layer of weatherstripping that is secured by a foam seal that helps prevent leaks and enhance comfort.

If your sliding patio door is not functioning as it should, you must to fix the problem immediately to avoid further damage and keep them functional for many years to be. Depending on the severity of the problem is, an DIY solution or a repair/replacement by a professional may be the best option.

The most frequent issues with sliding local patio door repairs doors include filthy rollers caused by debris on the tracks, wheels that are not aligned and a loose handle. In most cases, these issues can be addressed by regular maintenance and cleaning, including lubricating the track and rollers, as well as adjusting them and tightening the hardware. If these steps don't work, it's best to seek professional advice to ensure that your patio door is working exactly as it should. Review the warranty information before you decide to replace or repair your patio door. This will save you money in the long run on repairs and replacements.